Skip to main content
LSI Lake State Insulation home

Pole barns & shops

Pole barn & shop spray foam insulation

Closed-cell spray foam sprayed directly onto the steel is the most reliable way to stop a pole barn or shop roof from sweating and dripping, and it turns a cold building into one you can heat affordably. We insulate shops, garages, ag buildings and hobby barns across Isanti and the surrounding counties.

  • Stops roof condensation
  • Heated or unheated buildings
  • Adds rigidity to steel panels
  • Shops, garages and ag buildings
Pole building shop with closed-cell spray foam covering the steel roof and walls

Stop the drip

A steel roof over a heated or humid space will sweat. Snow melting off a truck, a propane heater, a concrete floor and even the ground under the slab all add moisture, and it condenses on the cold steel overhead, then drips on your equipment and rusts the fasteners.

Closed-cell foam sprayed directly on the underside of the steel keeps that warm, humid air from ever touching the cold panel. It is the most dependable condensation fix for metal buildings in a Minnesota winter.

Heated, unheated or in between

How much foam a building needs depends on how you'll use it. An unheated machine shed may only need a thinner coat to control condensation. A heated shop you work in all winter needs more R-value on the roof and walls to keep heating costs reasonable. We match the thickness to your heating plans, not a one-size-fits-all number.

Spray foam rig trailer with proportioner, hose reel and drums parked at a post-frame building

Getting the building ready

A little prep keeps spray day smooth:

  • Steel and framing need to be dry and clean so the foam bonds
  • Wiring, boxes and anything mounted to the walls should be in place
  • Vehicles, equipment and stored items move out or get covered
  • We mask overhead doors, windows and anything that stays foam-free
  • Plan to stay out of the building for the foam's re-occupancy period

Fire safety in a working shop

Exposed spray foam is combustible. Depending on how the building is used and what your building official requires, foam may need to be covered with a thermal barrier like drywall or an approved protective coating. If you weld, grind or heat with a wood stove, plan on covering it. We'll walk through the options during the site visit.

FAQ

Pole barns & shops questions

How much does it cost to spray foam a pole barn?

It depends on the building's size, the foam thickness you need for how the building is used, and access. We look at every building in person and give you a written estimate with the foam type, thickness and R-value spelled out.

Can you spray foam over old insulation or drip-stop in a pole barn?

Foam needs a clean, dry surface to bond to, so old blanket insulation or loose vapor barrier usually has to come out first. We'll look at what is there during the site visit and tell you exactly what needs to happen.

Does closed-cell spray foam add strength to a pole building?

Yes. Closed-cell foam bonds to the steel and framing and stiffens the panels, which adds racking strength and reduces panel noise in wind and rain.

Tell us about your project

Building a barndo, a custom home or a shop? Reach out and we'll set up a time to see it. No pressure, no guesswork pricing.